Table of Contents
Inbound Network Ports Table
Here you can find a list of ports that need to be opened for the software-based TrueConf MCU server to work properly. To make the administration and integration of different solutions easier for you, the basic values are similar to the port ranges for TrueConf Server.
To find out how to open the ports, please refer to your OS or network equipment documentation, or contact your company’s system administrator.
| Port | Transport | Protocol | What is it used for? | Is it possible to change? |
|---|---|---|---|---|
| 22 | TCP | SSH | To access the OS on which the MCU is installed | No |
| 80 | TCP | HTTPS | To access the TrueConf MCU web interface | No |
| 443 | TCP | HTTPS | To access the TrueConf MCU web interface when using SSL certificate | No |
| 1720 | TCP | H.323 | For H.323 call signaling via H.225 protocol | Yes |
| 52000-52499 | TCP | H.323 | For H.323 call signaling via H.245 protocol | Yes |
| 5060 | UDP, TCP | SIP | For SIP call signaling | Yes |
| 52500-52999 | UDP,TCP | BFCP | To display content as a second stream via SIP protocol | Yes |
| 48000-51998 | UDP | RTP | To receive RTP traffic after the session is established | Yes |
| 20000-40000 |
UDP,TCP | RTP/RTCP | Required for WebRTC operation. Between server and the browser of user. | No |
Outgoing Network Ports Table
These ports affect only the outbound traffic from your corporate network, which means that your corporate communications will stay secure even if outbound ports are opened. Normally, the ports for outgoing connections are already open.
| Port | Transport | Protocol | What is it used for? | Is it possible to change? |
|---|---|---|---|---|
| 443 | TCP | HTTPS | To the registration server | No |
| 554 | TCP | RTSP | To capture a video stream from an RTSP camera | No |
| 1935 | TCP | RTMP | Required for the conference streaming | No |
| 5060 | UDP, TCP | SIP | For SIP call signaling | Yes |
| 5900-5910 | TCP | VNC | To capture a desktop using a VNC server | No |
| Unknown* | UDP, TCP | RTP | To send RTP traffic after the session is established | No |
| 20000-40000 |
UDP,TCP | RTP/RTCP | Required for WebRTC operation. Between server and the browser of user. | No |
* The port range is unknown and depends on the opposite side.
How to reassign ports
You can change the ports by opening the Administration → Network section and then selecting the TCP/IP ports tab:
